1. System Three Resins, Inc.
  2. Product Application
  3. Sculpwood Putty & Paste

Sculpwood Putty Coverage

The amount of Sculpwood required for a given project varies widely because it is difficult to estimate the volume of an irregular void.

You will need to estimate the cubic inches of the void by measuring the average length X width x depth.  The sum of this calculation is the total cubic inches.  SculpWood Putty comes in 4 kit sizes.  The kits are listed below with the number of cubic inches per unit.

8 oz. / 14.4cubic inches

1 Quart / 58 cubic inches

2 Quart / 116 cubic inches

2 Gallon / 462 cubic inches

 

Was this article helpful?
1 out of 2 found this helpful

Comments

0 comments

Article is closed for comments.

Articles in this section