How Soon can SculpWood Putty be Applied Over the RotFix Epoxy?

SculpWood Putty can be applied over the RotFix immediately, or up to 72 hours later without sanding. A wet-on-wet application of the Sculpwood to the RotFix is encouraged to obtain a strong bond. There is, however, no detriment to applying the Sculpwood later in time. If the RotFix has cured longer than 72 hours, degloss the surface with sandpaper or a soft, flexible abrasive pad. Apply fresh Rotfix, followed by the Sculpwood putty.

For more detailed information on the application of the EndRot System, please check out the EndRot Product Sheet

Was this article helpful?
2 out of 2 found this helpful



Article is closed for comments.