What System Three products work best for epoxy inlays in stone?

Depending on the width and depth of the inlay, Mirrorcoat® or Mirrorcast™ will work well.  Smaller, shallower inlays can be poured with Mirrorcoat.  Above 1/4 inch depth, the Mirrorcoat will probably create excessive curing heat, possibly ruining the inlay.  For inlays this size or larger, use Mirrorcast.

Both products can be easily colored with our Epoxy Paste Pigments.

Was this article helpful?
0 out of 0 found this helpful



Article is closed for comments.