SculpWood Max is a reinforced, high-compressive strength, two-part epoxy putty compound. It has four times the compressive strength of standard SculpWood Putty. SculpWood Max is non-shrinking and forms a permanent bond to wood freshly coated with RotFix epoxy. The high compressive strength makes it ideal for repairing vertical load-bearing wood components such as posts or columns. Some wood components such as horizontal support beams with minor, non-structural damage can be fortified with SculpWood Max. Before beginning any critical structural repair, consult with a structural engineer to determine if SculpWood Max is suitable for your project.
For cosmetic repairs please watch our beam repair video and/or print the article below it.
Comments
A video to go with THIS repair would have been MUCH more helpful, you didn't mention Bor8 rods, their spacing and placement would have been invaluable! The provided video should have matched the instructions! Using 50% wood to pack etc, Instructions on rebar size & placement, duct tape, etc your video just uses putty, and wax paper against molds is also not mentioned! Also, this link should be MUCH easier to find!
Please sign in to leave a comment.