My SculpWood Putty won’t stick to the repair surface.

SculpWood Putty is designed to work with RotFix penetrating epoxy.  The putty sticks readily to the RotFix primed surface.  This combination of products provides a permanent bond with the wood substrate.  However, in some instances, RotFix may not be available and the SculpWood Putty will need to be used as a standalone product. 

The putty in some cases will have difficulty sticking to bare wood surfaces.  An effective way to get the putty to stick is to take a small amount of the mixed SculpWood and scrub/work it into the wood substrate, thus priming the surface.  Once this is done, press the remaining putty onto the (SculpWood) primed surface.  

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.