Can System Three® coating products be buffed or polished?

Absolutely.  A number of System Three products can be buffed and polished once fully cured.  This process will remove dust, surface scratches, and other minor defects. The video below details how to buff and polish our popular MirrorCoat™ bartop coating. The same process can be applied to buffing and polishing WR-LPU, Marine Spar Varnish, and our other epoxy coatings.

The same process is used to increase or decrease gloss, depending on the grit of the abrasive being used.  See the MirrorCoat Buffing & Polishing Procedure below for detailed instructions.  To achieve a lower surface gloss, use the reverse of the steps shown in the video, and skipping the polishing step.

Guide to Buffing and Polishing

System Three® also offers a sanding and buffing kit Repair_RestoreKitContents_300dpi.jpg

 

 

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.