Injecting adhesives.

All of our two-part adhesives are high in viscosity.  They can be difficult and time-consuming to inject if measuring and mixing by hand, and loading an empty syringe with mixed material to inject.  To avoid this, some are packaged in cartridges for convenient dispensing without measuring or mixing.  These are Gel Magic, T-88, and QuickCure 5.  The cartridges come with a mixing tip and fit in a conventional caulking gun.  The tips are not reusable and should be discarded after the contents have hardened, but material remaining in the cartridge itself can be stored for later use. 

GelMagic_Cartridge__5_.JPG

Example of a System Three Adhesive Cartridge

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.