Which product do you recommend for gluing oily woods such as teak and rosewood?

We recommend the G-2 Adhesive for oily woods. Surfaces to be bonded should be free of oils for optimal adhesion. With a clean cotton rag liberally moistened with lacquer thinner, vigorously wipe area to be bonded. While surface is still moist with solvent, wipe with a dry rag and allow to dry completely. If necessary, repeat wiping until surface dries to a whitish color indicating extraction of surface oil. Once dry, sand using 120 grit to open up the grain. Bond within eight hours of cleaning.

Was this article helpful?
0 out of 0 found this helpful



Article is closed for comments.