Questions? We have answers.

What is the best way to fill voids and holes?

For wood substrates, we recommend using our QuickCure 5 in either u-TAH or 50 mL cartridges with the proper mix tips. QuickCure 5 provides an air-free and clear epoxy finish that will not allow for bubbles to release from the wood since it sets up so quickly.

Please layer up the epoxy in the void or crack over time (5 minutes in between layers), in order to prevent the epoxy from getting too hot and inducing an exothermic reaction. 

 

 

 
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request